Please visit the Emdom USA manufacturer section at www.militarymorons.com for additional details and photos (Note MultiCam product pictured is older version with non color matching materials).
*All features below are described with the pouch being horizontal and facing away from you.
MOLLE/PALS compatible via two integrated Emdom/MM MOLLE attachment straps. Can be mounted to three or four columns of PALS.
On the rear of the carrier, at the top left and right are Tri-glides. Just above the last bottom row of MOLLE/PALS webbing on the left and right are Looplocs. These four attachment points are for mounting our Emdom H2O Hydration Carrier Should Strap System (sold separately). These four attachment points can also be used to mount the H2O carrier to our Emdom/MM Battle Suspenders (sold separately) via additional hardware (NOT included).
Exterior front and sides:
Front features 8 rows x 4 columns of PALS webbing. At the top is a 4" x 3" loop Velcro area integrated with the top 2 rows of PALS webbing. Each side features 6 rows x 2 columns of PALS webbing. There are four 1” tab loops on the front for use as tie-downs or lash points. Integrated into the front of the carrier is a full length general purpose pocket with both a zippered opening at the very top and in the middle. Zippered openings are covered, protecting them from damage and the elements.
Exterior back and bottom:
Back features full MOLLE/PALS webbing grid with proprietary Emdom/MM MOLLE attachment system which utilizes hook and loop Velcro to secure the ends of each strap after they’ve been weaved through a MOLLE/PALS platform. Drainage grommet at the very bottom of the pouch allows drainage of water, sand, and other unwanted debris.
Opening of main compartment:
Dual zippered opening is protected from damage and the elements by full length cover flap. Each zipper pull features 2 snaps which ensure a secure closure when snapped together. At the very top middle facing the back of the carrier is a hydration tube port with elastic flap cover which will accommodate most bite valves, mouth pieces, and attachments.
Interior of main compartment:
The front portion features a 4.5" x 5" zippered mesh pocket for connectors, spare bite valve, cleaning tablets, etc. Behind the mesh pocket is a 4" x 4" loop Velcro panel for storing ID/IFF patches and markers. The back portion of the interior features a mesh reservoir pocket with an elastic opening. Towards the bottom is a 3” wide elastic compression strap. At the top is a 550 paracord loop for hanging a reservoir.
Stocked in Black, Coyoteish, MultiCam, SDU Grey, Sewer Green. Available custom order colors: 3 Color Desert, Brown, Foliage Green, Khaki, Navy Blue, Olive Green, UCP, and Woodland. Please email us at email@example.com for all custom color inquiries.